METHODOLOGY FOR MEASURING THE SHEAR STRESS OF PLASTERBOARDS

Authors

  • Ondřej Zobal Czech Technical University in Prague, University Centre for Energy Efficient Buildings, Trinecká 1024, 273 43 Buštehrad, Czech Republic Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29 Prague 6, Czech Republic
  • Robert Jára Czech Technical University in Prague, University Centre for Energy Efficient Buildings, Trinecká 1024, 273 43 Buštehrad, Czech Republic Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29 Prague 6, Czech Republic
  • Martin Hataj Czech Technical University in Prague, University Centre for Energy Efficient Buildings, Trinecká 1024, 273 43 Buštehrad, Czech Republic Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29 Prague 6, Czech Republic

DOI:

https://doi.org/10.14311/APP.2017.13.0157

Keywords:

plasterboard, shear strength perpendicular to the plane of the board, EN 789, ASTM

Abstract

Plasterboards have to meet many requirements for certification. The mechanical properties of itself plasterboard are one of them. The important mechanical property of the plasterboard is the shear strength perpendicular to the plane of the board. The European Standard refers to performing the relevant test for the procedure set out in the wood standard EN 789. But is this methodology for plasterboard the most suitable? This paper compares this recommended method with the alternative method according to the American Standard ASTM D5379 with indicating the results of a specific measurement.

Downloads

Download data is not yet available.

Downloads

Published

2017-11-13

How to Cite

Zobal, O., Jára, R., & Hataj, M. (2017). METHODOLOGY FOR MEASURING THE SHEAR STRESS OF PLASTERBOARDS. Acta Polytechnica CTU Proceedings, 13, 157–160. https://doi.org/10.14311/APP.2017.13.0157

Issue

Vol. 13 (2017): NMM 2017 - Nano & Macro Mechanics 2017

Section

Articles