EFFECT OF ANNEALING ON THE REAL STRUCTURE AND MICROSTRUCTURE OF ADVANCED LASER PROCESSED AISI H13 TOOL STEEL

Authors

  • Karel Trojan CTU in Prague, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Trojanova 13, 120 00 Prague 2, Czech Republic
  • Václav Ocelík Department of Applied Physics, Zernike Institute for Advanced Materials, Faculty of Science and Engineering, University of Groningen, Nijenborgh 4, 9747 AG, Groningen, The Netherlands
  • Nikolaj Ganev CTU in Prague, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Trojanova 13, 120 00 Prague 2, Czech Republic
  • Stanislav Němeček RAPTECH s. r. o., U Vodárny 473, 330 08 Zruc-Senec, Czech Republic
  • Jaroslav Čech CTU in Prague, Department of Materials, Faculty of Nuclear Sciences and Physical Engineering, Trojanova 13, 120 00 Prague 2, Czech Republic
  • Jiří Čapek CTU in Prague, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Trojanova 13, 120 00 Prague 2, Czech Republic
  • Jakub Němeček CTU in Prague, Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Trojanova 13, 120 00 Prague 2, Czech Republic

DOI:

https://doi.org/10.14311/APP.2018.17.0015

Keywords:

laser processing, cladding, annealing, microstructure, AISI H13 tool steel

Abstract

The aim of this paper is to describe the effects of annealing on the microstructure of laser cladded AISI H13 tool steel using various methods. Advanced laser technology has the potential to replace conventional methods to make and repair dies. However, it has to be determined whether the newly created surface still needs to be heat-treated, which would cause additional repair costs. No significant effect of heat treatment on the microstructure and real structure of the clads was detected, but further confirmation, in particular by measuring wear resistance, is needed.

Downloads

Download data is not yet available.

Downloads

Published

2018-06-26

How to Cite

Trojan, K., Ocelík, V., Ganev, N., Němeček, S., Čech, J., Čapek, J., & Němeček, J. (2018). EFFECT OF ANNEALING ON THE REAL STRUCTURE AND MICROSTRUCTURE OF ADVANCED LASER PROCESSED AISI H13 TOOL STEEL. Acta Polytechnica CTU Proceedings, 17, 15–19. https://doi.org/10.14311/APP.2018.17.0015