Experimental Studies of Arc Motion Between Two Parallel Runners with Splitter Plates
DOI:
https://doi.org/10.14311/ppt.2020.1.16Keywords:
LVCB, splitter plate, arc motion, arc voltageAbstract
In this paper, we present an experimental study in a simplified arc chamber geometry of Low-Voltage Circuit Breaker (LVCB). The influence of vent aperture on arc motion and the influence of splitter plates on arc voltage drop and arc motion are studied. The arc chamber is composed by two parallel arc runners and following the configuration chosen by one or two splitter plates. The experimental setup is completed by a generator (capacitor bench with triggered switch), a high-speed camera and electrical measurements. The arc ignition, arc displacement, arc splitting and arc re-strike have been observed. The results will be described and discussed for different experimental configurations.References
A. Mutzke, T. Ruther, M. Lindmayer, and M. Kurrat. Arc behavior in low-voltage arc chambers. European Physical Journal Applied Physics, 49, 2010. doi:10.1051/epjap/2010001.
J. Lu, G. Déplaude, F. Freton, J.-J. Gonzalez, and P. Joyeux. Experimental and simulation studies on the voltage drop of arc in low-voltage circuit breaker. European Physical Journal Applied Physics, 6(3), 2019. doi:10.14311/ppt.2019.3.256.
D. Shin, I. O. Golosnoy, T. G. Bull, and J. W. McBride. Experiment study on the influence of vent aperture size and distrubution on arc motion and interruption in low-voltage switching devices. 4th International Conference on Electric Power Equipment-Switching Technology (ICEPE-ST), 2017. doi:10.1109/ICEPE-ST.2017.8188830.
J. W. McBride, K. Pechrach, and P. M. Weaver. Arc root commutation from moving contacts in low voltage devices. IEEE Transactions on Components and Packaging Technologies, 24(3), 2001. doi:10.1109/6144.946475.
M. Lindmayer, E. Marzahn, A. Mutzke, T. Ruther, and S. M. The process of arc splitting between metal plates in low voltage arc chutes. IEEE Trans. CPMT, 29(2), 2006. doi:10.1109/HOLM.2004.1353090.
A. Mutzke, T. Ruther, M. Kurrat, M. Lindmayer, and E. D. Wilkening. Modeling the arc splitting process in low voltage arc chutes. 53 rd IEEE Holm Conf. on Electrical Contacts Pittsburgh, 2007. doi:10.1109/HOLM.2007.4318213.
F. Yang, M. Rong, and Y. Wu. Numerical simulation of the eddy current effects on the arc splitting process. Plasma Science and Technology, 14(11), 2012. doi:10.1109/TPS.2012.2050703.
F. Yang, M. Rong, and Y. Wu. Numerical analysis of arc characteristics of splitting process considering ferromagnetic plate in low-voltage arc chamber. IEEE Trans. Plasma Sci., 43(43), 2010. doi:10.1088/0022-3727/43/43/434011.
J. W. McBride and P. M. Weaver. A review of arcing phenomena in low voltage current limiting circuit breakers. IEE Proc. Sci. Meas. and Tech., 1(23), 2001. doi:10.1049/ip-smt:20010185.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).