Determination of Pavement Elevations by the 3D Scanning System and Its Verification

Authors

  • Tomáš Křemen Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29, Praha 6, Czech Republic
  • Martin Štroner Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29, Praha 6, Czech Republic
  • Pavel Třasák Czech Technical University in Prague, Faculty of Civil Engineering, Thákurova 7, 166 29, Praha 6, Czech Republic

DOI:

https://doi.org/10.14311/gi.12.9

Keywords:

3D scanning, checking measurement, pavement roughness, elevation

Abstract

It is necessary to be careful of geometric accuracy of the roadways when constructing them.Correct thickness of the individual construction layers together with roughness of thepavement belongs among important influences ensuring lifetime of the roadways andvehicles and for comfortable and safe car ride. It is necessary beside other things to havea reliable check measurement method at disposal so as to ensure the required accuracy ofthe individual construction layers will be achieved. The check measurement method mustbe able to measure a checked construction component with the required accuracy and withsufficiently high density describing not only global deviations, but also local deviations.

The highest requirements on accuracy are placed on the final construction layer of theroadway. Layer thickness and pavement roughness are being evaluated here. The 3Dterrestrial scanning method is currently offered for geometric checking of its realization.The article deals with testing of procedure of the pavement roughness measurement withthe 3D terrestrial scanning system and with its verification by a total station measurement.Emphasis is put on verification of accuracy of absolute heights of points in the 3D modelof the pavement and on size of random errors in the elevation component. Results of thetesting clarified using the 3D terrestrial scanning systems and their accuracy for check ofthe roadway surface.

References

KŘEMEN, T. - KAŠPAR, M. - POSPÍŠIL, J.: Operating Quality Control of Ground

Machines by Means of the Terrestrial Laser Scanning System. In: Image Engineering and Vision Metrology [CD]. Dresden: ISPRS, 2006, ISSN 1682-1750.

KŘEMEN, T. - POSPÍŠIL, J. - KOSKA, B.: Laser Scanning for Checking Earth Moving Works. In: INGEO 2008 - 4th International Conference on Engineering Surveying [CD-ROM]. Bratislava: Department of Surveying, SUT in Bratislava, 2008, ISBN 978-80-227-2971-0, s. 1-10.

ŠTRONER, M. - POSPÍŠIL, J. - KOSKA, B. - K EMEN, T. – URBAN, R. - SMÍTKA V. - TŘASÁK P.: 3D skenovací systémy. Praha, eská technika - nakladatelství ČVUT, 2013, ISBN 978-80-01-05371-3.

KOSKA, B.: Calibration of profile laser scanner with conical shape modification for

autonomous mapping system. In: Proceedings of SPIE – Videometric, Range Imaging, and Applications XII; and Automated Visual Inspection, Munich, 2013, ISBN 978-0-8194-9607-2.

URBAN, R. - MICHAL, O.: Analýza technologie pro určování průhybové čáry mostních konstrukcí. Grant Journal [online]. 2013, ro . 2, . 2, ISSN 1805-062X.

Downloads

Published

2014-06-03

Issue

Section

Articles