CALIBRATION OF INPUT PARAMETER VALUES FOR AN ADVANCED MATERIAL MODEL OF SPRAYED CONCRETE

Authors

  • Martin Závacký Brno University of Technology, Faculty of Civil Engineering, Institute of Geotechnics, Veverí 331/95, 602 00 Brno, Czech Republic
  • Juraj Chalmovský Brno University of Technology, Faculty of Civil Engineering, Institute of Geotechnics, Veverí 331/95, 602 00 Brno, Czech Republic
  • Lumír Miča
  • Petr Bílek

DOI:

https://doi.org/10.14311/APP.2018.16.0040

Keywords:

shotcrete, triaxial tests, calibration, material model, numerical analysis

Abstract

The paper briefly presents an advanced material model for shotcrete involving many aspects of the actual behavior of concrete. However, the contribution is focused on determination and calibration of selected input parameter values for practical use of the model in structural analysis. Two cross sections of different geological conditions were chosen from a utility tunnel in Brno in order to obtain sprayed concrete samples. The laboratory tests conducted are described and then compared with results from numerical approximations.

Downloads

Download data is not yet available.

Downloads

Published

2018-06-19

How to Cite

Závacký, M., Chalmovský, J., Miča, L., & Bílek, P. (2018). CALIBRATION OF INPUT PARAMETER VALUES FOR AN ADVANCED MATERIAL MODEL OF SPRAYED CONCRETE. Acta Polytechnica CTU Proceedings, 16, 40–45. https://doi.org/10.14311/APP.2018.16.0040

Issue

Vol. 16 (2018): 45th CONFERENCE FOUNDATION ENGINEERING BRNO 2017

Section

Articles