3d finite element simulation of reinforced concrete column strengthened by partially confined carbon fibre reinforced polymer under concentric loading

Authors

  • Fariz Aswan Ahmad Zakwan School of Civil Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, Kampus Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang, Malaysia
  • Ruqayyah Ismail School of Civil Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, Kampus Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang, Malaysia
  • Hazrina Ahmad School of Civil Engineering, College of Engineering, Universiti Teknologi MARA, Cawangan Pulau Pinang, Kampus Permatang Pauh, 13500 Permatang Pauh, Pulau Pinang, Malaysia
  • Raizal Saifulnaz Muhammad Rashid Department of Civil Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

DOI:

https://doi.org/10.14311/APP.2022.33.0008

Keywords:

ABAQUS, CFRP, finite element, RC column

Abstract

In this paper, numerical simulation initiated to investigate the mechanical response of reinforced concrete (RC) column strengthened by partially confined carbon fiber reinforced polymer (CFRP). An experimental investigation of the circular hollow unconfined and confined RC column enhances with a partially CFRP sheet has been performed to investigate its behavior under concentric loading on top of the RC column. From the experimental data, the critical buckling failure of the RC column observed. Therefore, the prediction behavior of the RC column strengthened with partially confined CFRP under concentric loading was made with the application of the general-purpose of ABAQUS finite element simulation. From the outcome of the simulation results, the predicted buckling failure compared and validated against the experimental data. The predicted model discovered to agrees well with the experimental work output.

Downloads

Download data is not yet available.

Downloads

Published

2022-03-03

How to Cite

Ahmad Zakwan, F. A., Ismail, R., Ahmad, H. ., & Muhammad Rashid, R. S. . (2022). 3d finite element simulation of reinforced concrete column strengthened by partially confined carbon fibre reinforced polymer under concentric loading. Acta Polytechnica CTU Proceedings, 33, 8–14. https://doi.org/10.14311/APP.2022.33.0008