Analysis of Four Phase Interleaved Boost Converter
DOI:
https://doi.org/10.14311/TEE.2017.4.110Abstract
This paper deals with analysis of the four phase interleaved DC-DC converter for higher power application. The interleaved topology is widely used due to its advantage as lower input current ripple which means volume reduction of the input capacitor. The current ripple equation of an input current for the boost operation mode and the ripple current in the individual phase of the interleaved converter using uncoupled inductor are shown. The theoretical equations are supplemented by the simulation results using the Spice simulator and by measurement on the interleaved converter.References
Texas Instruments “Power Tips: When to choose multiphase” https://e2e.ti.com/blogs_/b/powerhouse/archive/2013/10/31/powerlab-notes-when-to-choose-multiphase
Bodo´s Power Systems “Multiphase Buck Converters,” http://www.powerguru.org/multiphase-buck-converters/
R. Ovcarčík, P. Špánik, R. Pavlanin, “DC/DC converters used for a high input voltage based on a half-bridge topology,” TRANSCOM 2005 : 6-th European Conference of Young Research and Science Workers in Transport and Telecommunications, Žilina, 2005, ISBN 80-8070-417-1, pp. 57-62
S. Somkun, Ch. Sirisamphanwong, S. Sukchai, “A DSP-based interleaved boost DC–DC converter for fuel cell applications,” International Journal of Hydrogen Energy, Volume 40, Issue 19, 25 May 2015, pp. 6391-6404, http://www.sciencedirect.com/ science/article/pii/S0360319915006680
https://doi.org/10.1016/j.ijhydene.2015.03.069
N. Sundari, D. Jeba, R. Ramalakshmi, R. Rajasekaran, ”A Performance Comparison of Interleaved Boost Converter and Conventional Boost Converter for Renewable Energy Application,” Proceedings of 2013 International Conference on Green High Performance Computing, IEEE, 2013, pp. 6, DOI 10.1109/ICGHPC.2013.6533924, ISBN 978-1-4673-2592-9
https://doi.org/10.1109/ICGHPC.2013.6533924
M. Lazić,M. Živanov, B. Šašić, ”Desing of Multiphase Boost Converter for Hybrid Fuel Cell/Battery Power Sources,” Paths to Sustainable Energy, INTECH 2010, pp. 359-404, ISBN 978-953-307-401-6, https://doi.org/10.5772/13113
ON Semiconductor “Interleaved PFC”, https://www.onsemi.com/ pub/Collateral/TND380-D.PDF
M. O’Loughlin, “An Interleaving PFC Pre-Regulator for High-Power Converters,” Texas Instruments, http://www.ti.com/ download/trng/docs/seminar/Topic5MO.pdf
F. Musavi, W. Eberle, W. G. Dunford, “A High-Performance Single-Phase Bridgeless Interleaved PFC Converter for Plug-in Hybrid Electric Vehicle Battery Chargers,” IEEE Transactions on Industry Applications, Vol. 47, No. 4, 2011
https://doi.org/10.1109/TIA.2011.2156753
P.L. Wong, P. Xu, B. Yang, F.C. Lee, “Performance Improvements of Interleaving VRMs with Coupling Inductors,“ IEEE Transactions on Power Electronics, vol. 16, NO. 4, 2001
P. Cubon, R. Radvan, “Evaluation of Propulsion System of the Electric Go-kart,” In Proceedings of the 17th International Student Scientific Conference on Electrical Engineering POSTER 2013, May 16, 2013, Prague, ISBN 978-80-01-05242-6
R. Mazgut, P. Cubon, R. Radvan, “Possibilities optimizing energy consumption of electric vehicle,” In Proceedings of the 19th International Student Conference on Electrical Engineering POSTER 2015, ISBN 978-80-01-05728-5
H. B. Shin, J. G. Park, S. K. Chung, H. W. Lee, “Generalized Steady-state Analysis of Multiphase Interleaved Boost Converter with Coupled Inductors,” IEE Proceedings – Electric Power Applications, Vol. 152, No. 3, 2005
https://doi.org/10.1049/ip-epa:20045052
A. Ikriannikov, “The Benefits of the Coupled Inductor Technology” Maxim Integrated, Tutorial, https://www.maximintegrated.Com /en/app-notes/index.mvp/id/5997
J. Imaoka, M. Yamamoto, T. Kawashima, “High-power-density three-phase interleaved boost converter with a novel coupled inductor,” IEEJ Journal of Industry Applications, Vol. 1, No. 1, pp. 20-30
