Real-time Simulation of 3 Parallel PWM Rectifiers
Abstract
This paper describes the development of areal-time model up to 3 parallel PWM rectifiers and its
implementation on FPGA using LabVIEW development
environment. The main benefit of this real-time model is the
fact that there is no need for a real device or a test stand for
debugging of traction drive control SW. The Hardware-inthe-
Loop testing with similar RT model of an induction
machine has already brought large financial and time
savings. Moreover, destructive states or states difficult to
evoke can be tested using such a real-time model.
References
J. Bauer, “Single-Phase Pulse Width Modulated Rectifier,” Acta
Polytechnica, vol. 48, no. 3/2008, Czech Technical University in
Prague, pp. 84-87.
LogiCORE IP Floating-Point Operator v5.0. XILINX, 2011.
M. Kopecký, J. Švanda, and M. Vlcek, “Využití real-time simulací
pri návrhu rízení trakcních pohonu,” XXXIII. konference o
elektrických pohonech, Pilsen, pp. 84-89, June 2013.
M. Kopecký, V. Buba, “Príspevek k rízení pulzního usmernovace
lokomotivy 109E,” XXX. konference o elektrických pohonech,
Pilsen,, June 2007.
M. Kopecký, M. Bednár, “Dosavadní zkušenosti s algoritmy rízení
Q na lokomotive 109E a jednotce 5Ev Litva,” XXXI. konference o
elektrických pohonech, Pilsen,, June 2007.
J. Javurek, Regulace moderních elektrických pohonu. Grada, 2003.
E. Vitásek, Základy teorie numerických metod pro rešení
diferenciálních rovnic. Academica, 1994.
J. Švanda, Using NI PXI Express and CompactRIO to Develop
a Hardware-in-the-Loop Tester for Electric Driver ECUs
of Locomotive, National Instrument, Solutions, Case Studies.
[Online]. Available: http://sine.ni.com/cs/app/doc/p/id/cs-15423
[Accessed: 8 April. 2014].
High-Throughput LabVIEW FPGA Exercises. National
Instruments, 2012.
