New Ways of Controlling Dangerous Torsional Vibration in Mechanical Systems
Abstract
In general terms the mechanical systems (MS)mean the systems of driving and driven machines arranged
to perform the required work. We divide them into MS operating
with constant speed and MS working within a range
of speed. In terms of MS dynamics we understand the system
of masses connected with flexible links between them,
i.e. systems that are able to oscillate. Especially piston machines
bring heavy torsional excitation to the system, which
causes oscillation, vibration, and hence their noise. Based on
the results of our research, the torsional vibration control
as a source of given systems excitation, can be achieved by
application of pneumatic couplings, or pneumatic tuners of
torsional vibration. Existence of pneumatic couplings and
pneumatic tuners of torsional vibration developed by us,
creates the possibility of implementing new ways of torsional
oscillating mechanical system tuning. Based on the
above, the aim of the article is to present new ways of dangerous
torsional vibration control of mechanical systems by
application of pneumatic couplings and pneumatic tuners of
torsional vibration developed by us.
References
J. Homišin a kol., “Súčasné trendy optimalizácie strojov a zariadení”,
C–Press Košice, 2006, ISBN 80-7099-834-2.
J, Böhmer, “Einsatz elastischer Vulkan-Kupplungen mit linearer
und progressiver Drehfeder-charakteristik”, MTZ, 44/5, 1983.
V. Zoul, V, “Torzní vibrace v pohonech a způsob jejich snižování”,
Praha, ČSVTS 1984.
J. Homišin, J., “Methods of tuning torsionally oscillating mechanical
systems using pneumatic tuners of torsional oscillations”,
Transactions of the TU of Košice, 3/4, England, 1993, pp. 415
J. Homišin, J., “Mechanická sústava optimálne vyladená pneumatickou
spojkou”, UV SR/5274/2009.
J. Homišin, “Plynulo riadená mechanická sústava”. UV SR/ 5275/
J. Homišin, “Pneumatická pružná hriadeľová spojka”. Patent č.
/86.
J. Homišin, “Pneumatická pružná hriadeľová spojka s diferenčnými
členmi”. UV SR/5278/2009.
J. Homišin, “Regulačný systém pre zabezpečenie plynulej zmeny
charakteristiky pneumatických spojok”. P ČSSR/259225/87.
J. Homišin, “Regulačný systém pre realizáciu plynulého ladenia
mechanickej sústavy”. P SR/276927/92.
J. Homišin, “Pneumatická pružná hriadeľová spojka so schopnosťou
autoregulácie”. P ČSSR 278025/95.
J. Homišin, M. Jurčo, “Aplication of differential pneumatic dutches
voith and without autoregulation in torsionally oscillating mechanical systems”. The shock and vibration digest, 29/3, 1997,
USA, pp.44, (80%/20%).
J. Homisin, M. Jurčo, “Application of differential pneumatic clutch
with an additional regulating system”. The Shock and Vibration
Digest, USA, 30/6, 1998, pp.490, (80%/20%).
J. Homišin, “Dostrajanie ukadów mechanicznych drgajacych skretnie
przy pomocy sprzegie pneumatycznych. Kompendium
wyników pracy naukowo-badawczych autora”. Bielsko-Biała, ATH,
, [106 p]. ISBN 978-83-60714-55-3.
R. Grega, “Prezentácia výsledkov dynamickej torznej tuhosti
pneumatickej pružnej spojky s autoreguláciou na základe experimentálnych
meraní”. Acta Mechanica Slovaca, 2/2002, ročník 6,
s. 29 – 34.
P. Kaššay, M. Urbanský, “Úvod do problematiky prechodových
dejov v torzne mechanických sústavách”. Zborník 51. MVK
KČSaM, 2010. s. 130 – 136.
P. Kaššay, R. Grega, J. Krajňák, “Determination of objective function
for extremal control of torsional oscillating mechanical system“.
Transactions of the Universities of Košice. Nr. 3, 2009, pp.
–20. ISSN 1335-2334.
P. Kaššay, “Effect of Pneumatic Flexible Shaft Coupling on the
Size of Torsional Vibration“. 2 Międzynarodowa Konferencja Studentów
oraz Młodych Naukowców. Bielsko-Biała, Wydawnictwo
naukowe Akademii techniczno-humanistycznejj, 2012 pp. 99‒104.
ISBN 978-83-63713-23-2.
P. Lacko, V. Lacko, “Continuously Drisen Rezonance”. Strojárstvo
(3/4), 2000, pp. 127‒135, Zagreb, Croatia.
L. Pešík, P. Němeček, “Identification of the dynamic system of a
machine with an elastic base”. McNU 97, Chicago, USA, 1997.
L. Pešík, “Aplikace převodového mechanizmu v úlohách vibroizolace
strojů a zařízení”. Acta Mechanica Slovaca, ročník 6, 2/2002,
s. 75–78.