Laboratory research on evaluating the rutting resistance of natural asphalt concrete mixture
DOI:
https://doi.org/10.14311/AP.2026.66.0075Keywords:
sulphur spring, heat treatment, elemental analysis, resilient modulusAbstract
The road network in Iraq, particularly in the central and southern regions, suffers from frequent rutting due to harsh conditions, high temperatures, and the limited resistance of Regular Asphalt (RA) mixtures to repeated loading. These deformations reduce the service life of the pavement and increase maintenance costs. This study investigates the potential of improving asphalt mixture performance by incorporating Natural Asphalt (NA) sourced from the Abu Al-Jeer springs in Anbar Governorate. RA is the petroleum asphalt, which was obtained from the Dora oil refinery. The NA underwent two forms of treatment: thermal processing and blending with RA at varying ratios (20 %, 40 %, 60 %, and 80 %). Repeated load tests were performed on six different mixtures at 40 °C, with an applied pressure of 0.138MPa for 6 000 loading cycles. The results showed that mixtures containing treated NA exhibited significantly greater resistance to permanent deformation and in the Resilient Modulus (Mr). Notably, the mix containing 80% of NA showed a 72% reduction in permanent microstrain compared to the mixes containing RA, indicating a significantly improved mechanical performance. These findings suggest that NA is a viable and eco-friendly alternative for improving asphalt mixture performance in hot climates such as Iraq.
Downloads
References
A. J. Al-Janabi, H. A. Obaid. Analysis of the impact of overloading for trucks on the design life of flexible pavement. IOP Conference Series: Earth and Environmental Science 1374(1):012089, 2024. https://doi.org/10.1088/1755-1315/1374/1/012089
A. H. Mohaisen, H. A. Rashid. Study the causes and effects of frequent failures of roads pavement in Iraq. IOP Conference Series: Earth and Environmental Science 1374(1):012045, 2024. https://doi.org/10.1088/1755-1315/1374/1/012045
R. H. Latief, R. I. K. Zaki, A. H. Albayati. Analysis of road traffic accidents among Iraqi governorates. Civil and Environmental Engineering 19(1):134–148, 2023. https://doi.org/10.2478/cee-2023-0012
L. Chen, G. Liu, Z. Qian, X. Zhang. Determination of allowable rutting depth based on driving safety analysis. Journal of Transportation Engineering, Part B: Pavements 146(2):04020023, 2020. https://doi.org/10.1061/JPEODX.0000180
S. H. Basheet, R. H. Latief. Assessment of the properties of asphalt mixtures modified with LDPE and HDPE polymers. International Journal of Applied Science and Engineering 21(5):1–11, 2025. https://doi.org/10.6703/IJASE.202412_21(5).007
H. A. Rondón-Quintana, J. C. Ruge-Cárdenas, C. A. Zafra-Mejía. Natural asphalts in pavements: Review. Sustainability 15(3):2098, 2023. https://doi.org/10.3390/su15032098
I. Khusnutdinov, I. Goncharova, A. Safiulina. Extractive deasphalting as a method of obtaining asphalt binders and low-viscosity deasphalted hydrocarbon feedstock from natural bitumen. Egyptian Journal of Petroleum 30(2):69–73, 2021. https://doi.org/10.1016/j.ejpe.2021.03.002
M. M. Farhan, M. A. Rabeea, R. F. Muslim, T. A. Zidan. Chemical composition (saturate fraction) of western Iraq natural bitumen. Materials Today: Proceedings 42:2527–2533, 2021. https://doi.org/10.1016/j.matpr.2020.12.574
M. Wang, C. Xing. Evaluation of microstructural features of Buton rock asphalt components and rheological properties of pure natural asphalt modified asphalt. Construction and Building Materials 267:121132, 2021. https://doi.org/10.1016/j.conbuildmat.2020.121132
L. Chen, M. Liang, X. Wang, et al. Phase separation behavior of polymer modified asphalt by molecular dynamics and phase field method: A review. Advanced Industrial and Engineering Polymer Research 8(2):157–167, 2025. https://doi.org/10.1016/j.aiepr.2024.12.002
A. Chowdhury, P. Nourian, N. Wasiuddin, A. Peters. Investigation of polymer-asphalt compatibility using molecular dynamics simulation. The Journal of Physical Chemistry B 128(19):4821–4829, 2024. https://doi.org/10.1021/acs.jpcb.4c00672
J. G. Speight. Asphalt materials science and technology. Butterworth-Heinemann, 2015. https://doi.org/10.1016/c2013-0-15469-4
J. L. Kelso, A. R. Powell. Glance pitch from Tell Beit Mirsim. Bulletin of the American Schools of Oriental Research 95:14–18, 1944. https://doi.org/10.2307/1355170
N. Nciri, N. Cho. Laboratory methods for identification of geologic origins of natural asphalts with special emphasis on their potential uses: The case of Trinidad pitch and Utah bitumen. Materials Today: Proceedings 5(11):25730–25739, 2018. https://doi.org/10.1016/j.matpr.2018.11.068
R. Babagoli, M. Hasaninia, N. Mohammad Namazi. Laboratory evaluation of the effect of gilsonite on the performance of stone matrix asphalt mixtures. Road Materials and Pavement Design 16(4):889–906, 2015. https://doi.org/10.1080/14680629.2015.1042016
A. G. Shlimon, H. Mansurbeg, R. S. Othman, et al. Microbial community composition in crude oils and asphalts from the Kurdistan region of Iraq. Geomicrobiology Journal 37(7):635–652, 2020. https://doi.org/10.1080/01490451.2020.1753131
M. A. Fakhry, M. A. Saleh, A. G. Nayyef. Evaluation of the suitability of sulfur springs water for vital uses by studying the physical, chemical properties of some sulfur springs water in the city of Hit. IOP Conference Series: Earth and Environmental Science 1222(1):012041, 2023. https://doi.org/10.1088/1755-1315/1222/1/012041
M. W. Alkhafaji, J. Connan, M. H. Engel, S. W. Al- Jubouri. Origin, biodegradation, and water washing of bitumen from the Mishraq Sulfur Mine, northern Iraq. Marine and Petroleum Geology 124:104786, 2021. https://doi.org/10.1016/j.marpetgeo.2020.104786
F. A. Mohammed, R. H. Latief, A. Hamad Albayati. Assessment of traditional asphalt mixture performance using natural asphalt from sulfur springs. Journal of Engineering 30(01):54–73, 2024. https://doi.org/10.31026/j.eng.2024.01.04
F. Ahmed, R. Latief, A. Albayati. Effect of natural bitumen on the performance of hot asphalt mixture. Gazi University Journal of Science 37(3):1154–1170, 2024. https://doi.org/10.35378/gujs.1282239
H. K. Mohsin, R. H. Latief. Natural bitumen in hot asphalt mixture: Suitability of using treated natural bitumen instead of petroleum asphalt binder. IIUM Engineering Journal 26(2):27–50, 2025. https://doi.org/10.31436/iiumej.v26i2.3452
A. M. Nejres, Y. F. Mustafa, H. S. Aldewachi. Evaluation of natural asphalt properties treated with egg shell waste and low density polyethylene. International Journal of Pavement Engineering 23(1):39–45, 2022. https://doi.org/10.1080/10298436.2020.1728534
B. A. Mahmood. Influence of waste engine oil addition on the properties of natural asphalt. Journal of Physics: Conference Series 1999(1):012001, 2021. https://doi.org/10.1088/1742-6596/1999/1/012001
A. H. Albayati, A. M. Mohammed, M. J. Al-Kheetan, et al. Performance enhancement of natural asphalt using waste-derived modifiers: Sugarcane molasses and waste engine oil. Cleaner Waste Systems 11:100261, 2025. https://doi.org/10.1016/j.clwas.2025.100261
H. K. Mohsin, R. H. Latief. Properties evaluation of natural bitumen-filler mastic mixture. Engineering and Applied Science Research 52(1):66–80, 2025. https://doi.org/10.14456/easr.2025.6
The State Corporation For Roads & Bridges. Standard specifications for roads & bridges, chap. R9 – Hot-mix asphaltic concrete pavement. R&R, Revised edition, 2003.
ASTM International. ASTM D5/D5M-20. Standard test method for penetration of bituminous materials, 2020. https://doi.org/10.1520/D0005_D0005M-20
ASTM International. ASTM D36/D36M-14e1. Standard test method for softening point of bitumen (ring-and-ball apparatus), 2020. https://doi.org/10.1520/D0036_D0036M-14E01
ASTM International. ASTM D113/D113M-17(2023)e1. Standard test method or ductility of asphalt materials, 2023. https://doi.org/10.1520/D0113_D0113M-17R23E01
ASTM International. ASTM D70/D70M-21. Standard test method for specific gravity and density of semi-solid asphalt binder (pycnometer method), 2021. https://doi.org/10.1520/D0070_D0070M-21
ASTM International. ASTM D92-24. Standard test method for flash and fire points by cleveland open cup tester, 2024. https://doi.org/10.1520/D0092-24
Y. Erkuş, B. Kök, M. Yilmaz. The effects of Iraq natural asphalt on mechanical properties of bituminous hot mixtures. Teknik Dergi 33(2):11641–11660, 2022. https://doi.org/10.18400/tekderg.664187
ASTM International. ASTM D6927-22. Standard test method for Marshall stability and flow of asphalt mixtures, 2022. https://doi.org/10.1520/D6927-22
A. H. K. Albayati. Permanent deformation prediction of asphalt concrete under repeated loading. Ph.D. thesis, University of Baghdad, College of Engineering, Iraq, 2006. https://doi.org/10.13140/RG.2.1.2630.8242
Z. Liu, H. Wang, X. Gong, et al. Stiffening and toughening of asphalt mastic induced by bitumen–mineral selective molecular adsorption and nanostructural reconstruction. Sustainability 15(5):4398, 2023. https://doi.org/10.3390/su15054398
N. A. A. Mazalan, M. K. I. Mohd Satar, A. Mohamed, et al. Evaluation on the physical properties of asphaltene-modified bitumen. In Proceedings of AWAM International Conference on Civil Engineering 2022, vol. 2, p. 15–26. Springer Nature Singapore, 2024. https://doi.org/10.1007/978-981-99-6018-7_2
H. Zhang, Y. Li, J. Zhang, et al. Examining the rheological and adhesion performance of asphalt: Insights into the influence of SARA components. Case Studies in Construction Materials 21:e03427, 2024. https://doi.org/10.1016/j.cscm.2024.e03427
T. Khedaywi, M. Haddad, R. Mujalli, S. Shareef. Effect of sulfur on the asphalt cement and asphalt concrete mixture: State of the art. Innovative Infrastructure Solutions 8(11):286, 2023. https://doi.org/10.1007/s41062-023-01264-w
T. Liang, J.-F. Wang, X. Kou, P. Peng. Influence mechanism of original components on mechanical properties and transformation behaviors of natural bitumen. Fuel 371:131924, 2024. https://doi.org/10.1016/j.fuel.2024.131924
K. Bouchouk, T. Ninouh, A. Hamrouni. Improvement of the resistance of bituminous layers to the phenomenon of rutting by modifying the hydrocarbon binder. Innovative Infrastructure Solutions 7(2):174, 2022. https://doi.org/10.1007/s41062-022-00781-4
T. Li, Q. Jin, P. Jiang, et al. Performance optimization of modified gussasphalt binder prepared using natural asphalt. Frontiers in Materials 9:840380, 2022. https://doi.org/10.3389/fmats.2022.840380
E. Shaffie, J. Ahmad, A. K. Arshada, et al. Investigation on rutting performance of nanopolyacrylate and natural rubber latex polymer modified asphalt binder mixes. Jurnal Teknologi 78(7–3):10–14, 2016. https://doi.org/10.11113/jt.v78.9469
A. H. Albayati, M. J. Al-Kheetan, A. M. Mohammed, et al. Performance assessment of eco-friendly asphalt binders using natural asphalt and waste engine oil. Infrastructures 9(12):224, 2024. https://doi.org/10.3390/infrastructures9120224
K. A. Mohammed, A. I. Mansi, Y. R. Hussein. Performance evaluation of asphalt binder modified by natural rock asphalt. Revue des composites et des matériaux avancés – Journal of Composite and Advanced Materials 31(5):291–295, 2021. https://doi.org/10.18280/rcma.310504
A. Mukherjee. Life cycle assessment of asphalt mixtures in support of an environmental product declaration. Tech. rep., National Asphalt Pavement Institute, Lanham, MD, USA, 2016.
O. de Medeiros Melo Neto, I. Minervina Silva, L. C. de Figueiredo Lopes Lucena, et al. Viability of recycled asphalt mixtures with soybean oil sludge fatty acid. Construction and Building Materials 349:128728, 2022. https://doi.org/10.1016/j.conbuildmat.2022.128728
L. F. da Costa, L. P. T. Mendes, O. de Medeiros Melo Neto, et al. Economic and environmental benefits of recycled asphalt mixtures: Impact of reclaimed asphalt pavement and additives throughout the life cycle. Environmental Science and Pollution Research 32(17):11269–11291, 2025. https://doi.org/10.1007/s11356-025-36362-y
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Fatima Ahmed Mohammed, Roaa Hamed Latief, Amjad Albayati
This work is licensed under a Creative Commons Attribution 4.0 International License.
