Antonella Antonelli


The NA62 experiment at CERN aims at the very challenging task of measuring with 10% relative error the Branching Ratio of the ultra-rare decay of the K+ into π+ ν¯ν which is expected to occur only in about 8 out of 1011 Kaon decays. This will be achieved by means of an intense hadron beam, an accurate kinematical reconstruction and a redundant veto system for identifying and suppressing all spurious events. Good resolution on the missing mass in the decay is achieved using a high-resolution beam tracker to measure the kaon momentum and with a spectrometer equipped with straw tubes operating in vacuum. Hermetic veto (up to 50 mrad) of the photon from π0 decays is achieved with a combination of large angle veto (with a creative reuse of the old OPAL lead glass blocks), the NA48 liquid Krypton calorimeter and two small angle calorimeters to cover the angle down to zero. The identification of the muons and the consequent veto is performed by a fast hodoscope plane (used in the first level of the trigger to reduce the rate) and by a 17 meter, neon-filled RICH counter which is able to separate pions and muons in the momentum interval between 15 and 35 GeV. Particle identification in the beam (K+ separation) is achieved with an H2 differential Cherenkov counter. The trigger for the experiment is based on a multilevel structure with a first level implemented in the readout boards and with the subsequent level done in the software. The aim is to reduce the 10MHz level zero rate to a few kHz sent to the CERN computing centre. Studies are underway to use GPU boards in some key point of the trigger system to improve the performance.



  • There are currently no refbacks.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 1210-2709 (Print)
ISSN 1805-2363 (Online)
Published by the Czech Technical University in Prague