JATROPHA OIL WITH IRON NANOPARTICLES APPLICATION IN DRILLING PROCESSES

Veikko Shalimba, Vít Sopko

Abstract


A performance of heat transfer fluids has a substantial influence on the size, weight and cost of heat transfer systems, therefore, a high-performance heat transfer fluid is very important in many industries. Over the last decades, nanofluids have been developed. According to many researchers and publications on nanofluids, it is evident that nanofluids have a high thermal conductivity. The aim of this experimental study was to investigate the change of the workpiece temperature during drilling using Jatropha oil with iron nanoparticles and water with iron nanoparticles as lubricating and cooling fluids. These experiments were carried out with samples of nanofluid with different nanoparticles volume ratio, such as samples JN1, JN5 and JN10 of iron nanoparticles in the base Jatropha oil with a nanoparticle volume fraction of 1 %, 5% and 10% respectively and samples WN1, WN5 and WN10 of iron nanoparticles in the base water with a nanoparticle volume fraction of 1 %, 5% and 10% respectively.

Keywords


Jatropha oil, nanofluids, nanoparticles, temperature, drilling

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN 1210-2709 (Print)
ISSN 1805-2363 (Online)
Published by the Czech Technical University in Prague