Knowledge and technology transfer in construction engineering: two case studies involving special concrete
DOI:
https://doi.org/10.14311/AP.2025.65.0198Keywords:
knowledge and technology transfer, ultra-high-performance concrete, textile reinforced concreteAbstract
This research examines the dynamics of knowledge and technology transfer (KTT) within the construction industry while focusing on innovation in special concrete. The study aims to assess two representative cases in different European target regions, namely Germany and the Czech Republic. The aim is to evaluate the role of the KTT intermediaries employed, the significance of intellectual property during the transfer process, and the linearity of the transfer process. Methodologically, a qualitative case study approach was used, selecting two cases from prominent technical universities. The outcomes were complemented by additional research to unveil the prerequisites of the KTT structure within the selected institutions. Findings include the importance of KTT intermediaries in speeding up the transfer process.The presence of IP was not a determining factor in starting up a business. Lastly, a suggested linearity of the theoretical transfer process was not followed. These case studies serve as a call to action, aiming to explain and promote KTT processes within the construction sector and inspire further research to bridge the gap between theory and practical applications of transfer.
Downloads
References
X. Xue, R. Zhang, R. Yang, J. Dai. Innovation in construction: A critical review and future research. International Journal of Innovation Science 6(2):111–126, 2014. https://doi.org/10.1260/1757-2223.6.2.111
G. Taher. Industrial revolution 4.0 in the construction industry: Challenges and opportunities. Management Studies and Economic Systems 6(3/4):109–127, 2021.
Statista Research Department. Number of employees in the construction industry in the European Union (EU-27) from 2011 to 2020, by segment. [2023-09-11]. https://www.statista.com/statistics/763219/total-employed-persons-in-buildingconstruction-industry-eu/
Statista Research Department. Annual turnover of the construction industry in the European Union (EU-27) from 2011 to 2023, by segment. [2023-09-11]. https://www.statista.com/statistics/964601/construction-industry-turnover-eu-28/
J. Du, W. Meng, K. H. Khayat, et al. New development of ultra-high-performance concrete (UHPC). Composites Part B: Engineering 224:109220, 2021. https://doi.org/10.1016/j.compositesb.2021.109220
J. Hegger, M. Zell, M. Horstmann. Tailor Made Concrete Structures, chap. Textile Reinforced Concrete – Realization in applications. CRC press, 2008. https://doi.org/10.1201/9781439828410.ch61
M. A. Bajaber, I. Y. Hakeem. UHPC evolution, development, and utilization in construction: A review. Journal of Materials Research and Technology 10:1058–1074, 2021. https://doi.org/10.1016/j.jmrt.2020.12.051
N. M. Azmee, N. Shafiq. Ultra-high performance concrete: From fundamental to applications. Case Studies in Construction Materials 9:e00197, 2018. https://doi.org/10.1016/j.cscm.2018.e00197
S. Abbas, M. L. Nehdi, M. A. Saleem. Ultra-high performance concrete: Mechanical performance, durability, sustainability and implementation challenges. International Journal of Concrete Structures and Materials 10(3):271–295, 2016. https://doi.org/10.1007/s40069-016-0157-4
M. Curbach. Interview, conducted by U. Michel-Schneider, 2023.
Global Alliance for Buildings and Construction. 2020 Global status report for buildings and construction: Towards a zero-emission, efficient and resilient buildings and construction sector, 2020.
M. Sexton, P. Barrett. The role of technology transfer in innovation within small construction firms. Engineering, Construction and Architectural Management 11(5):342–348, 2004. https://doi.org/10.1108/09699980410558539
B. Ozorhon, C. Abbott, G. Aouad. Construction innovation: Towards a project-level analysis. Fraunhofer – Bau IRB Verlag pp. 566–576. [2023-09-11]. https://www.irbnet.de/daten/iconda/CIB15634.pdf
P. Uusitalo, R. Lavikka. Technology transfer in the construction industry. The Journal of Technology Transfer 46(5):1291–1320, 2021. https://doi.org/10.1007/s10961-020-09820-7
A. K. Akhnoukh. Advantages of contour crafting in construction applications. Recent Patents on Engineering 15(3):294–300, 2021. https://doi.org/10.2174/1872212114666200218111631
S. El-Sayegh, L. Romdhane, S. Manjikian. A critical review of 3D printing in construction: Benefits, challenges, and risks. Archives of Civil and Mechanical Engineering 20(2):34, 2020. https://doi.org/10.1007/s43452-020-00038-w
S. Abdul Wahab, R. C. Rose, U. Jegak, H. Abdullah. A review on the technology transfer models, knowledge-based and organizational learning models on technology transfer. European Journal of Social Sciences 10(4):550–564, 2009. [2023-09-11]. https://ssrn.com/abstract=1949149
D. Bogahawatte. An overview of technology transfer and technology transfer models. [2023-09-11]. https://www.academia.edu/30362045/An_Overview_of_Technology_Transfer_and_Technology_Transfer_Models
European Commission. Competence centre on technology transfer: What is technology transfer?, 2023. [2023-09-11]. https://knowledge4policy.ec.europa.eu/technologytransfer/what-technology-transfer_en
D. Gann. Putting academic ideas into practice: Technological progress and the absorptive capacity of construction organizations. Construction Management and Economics 19(3):321–330, 2001. https://doi.org/10.1080/01446190010020480
A. Shapira, Y. Rosenfeld. Achieving construction innovation through academia-industry cooperation – keys to success. Journal of Professional Issues in Engineering Education and Practice 137(4):223–231, 2011. https://doi.org/10.1061/(ASCE)EI.1943-5541.0000057
G. Aouad, B. Ozorhon, C. Abbott. Facilitating innovation in construction: Directions and implications for research and policy. Construction Innovation 10(4):374–394, 2010. https://doi.org/10.1108/14714171011083551
C. Abbott, G. Aouad, L. Madubuko. An innovation platform for construction: NWUA pilot project to develop innovation platforms in non-science research disciplines. North West Universities Association, 2008.
R. Sovják. Interview, conducted by U. Michel-Schneider, 2023.
MOB-Bars. [2023-09-11]. https://www.mob-bars.com/
Ministry of Industry and Trade Czech Republic. Starting of industrial production process of protective bariers made of high-performance concrete, 2016. [2023-09-11]. https://starfos.tacr.cz/en/projekty/FV10547
Czech Technical University in Prague. CTU received the Willenberg Foundation medal at IDET in Brno, 2019. [2023-09-11]. https://aktualne.cvut.cz/en/reports/20190531-ctu-received-the-willenberg-foundation-medalat-idet-in-brno
Justia Patents. Patents assigned to Mob-Bars s.r.o, 2019. [2023-09-11]. https://patents.justia.com/assignee/mob-bars-s-r-o
A. Funkner, N. Schmieder-Galfe, O. Uecke. Effective technology transfer in biotechnology, chap. Case study 4: A model for IP transfer and shareholding for university spin-offs: The “Dresden model”, pp. 43–50. Imperial College Press, UK, 2015. https://doi.org/10.1142/9781783266814_0004
TUDAG. TU Dresden Aktiengesellschaft – Bildung, Transfer, Entrepreneurship. [2023-09-11]. https://tudag.de/
Technische Universität Dresden. The excellence center TUDexcite, 2025. [2025-03-05]. https://tu-dresden.de/forschungtransfer/transfer/tud-excite?set_language=en
C3 – Carbon Concrete Composite. Was ist Carbonbeton? Klimaneutrales Bauen mit Carbonbeton. [2023-09-11]. https://carbonconcrete.org/carbonbeton/was-ist-carbonbeton/
Deutsche Zukunftspreis. Faszinierendes Material Carbonbeton. [2025-03-05]. https://www.deutscherzukunftspreis.de/de/team-1-2016
M. Curbach, M. Frenzel, G. Henn, et al. Cube: Neues Bauen mit Carbonbeton. Wasmuth Verlag, 2022. ISBN 978-3-8030-2372-8.
S. Crowe, K. Cresswell, A. Robertson, et al. The case study approach. BMC Medical Research Methodology 11(1):100, 2011. https://doi.org/10.1186/1471-2288-11-100
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Ulrike Michel-Schneider, Andrea Palazzo
This work is licensed under a Creative Commons Attribution 4.0 International License.
