Experimental investigation of polyurethane-coated HPFRC panels under direct contact blast
DOI:
https://doi.org/10.14311/AP.2025.65.0188Keywords:
high-performance fibre-reinforced concrete, elastomeric coating, thin panel, direct contact explosion, experimental studyAbstract
High-performance fibre-reinforced concrete (HPFRC) exhibits exceptional resistance to dynamic loading, making it a promising material for structures exposed to blast or impact events. However, when used to produce thin panels, it can experience scabbing under extreme loads. To address this and enhance the blast resistance, this study explores the application of a polyurethane (PU) coating to the HPFRC panels. Coated and uncoated panels undergo direct contact blast testing and various factors, such as crater area, rear fragment formation, cracking, and residual flexural strength, are analysed. Our study indicates that applying a PU coating to the panels could effectively prevent scabbing and mitigate the risk of complete perforation, while it appears that it results in the panel absorbing more energy during blast, leading to increased damage and a subsequent decrease in residual flexural strength compared to bare panels.
Downloads
References
J. Fornůsek, J. V., M. Mára, et al. Ballistic panel and ballistic system. US Patent US 10,648,780 B2, 2020.
M. Mára, C. Talone, R. Sovják, et al. Experimental investigation of thin-walled UHPFRCC modular barrier for blast and ballistic protection. Applied Sciences 10(23):8716, 2020. https://doi.org/10.3390/app10238716
P. Hála, A. Perrot, B. Vacková, et al. Experimental and numerical study on ballistic resistance of polyurethane-coated thin HPFRC plate. Materials Today: Proceedings 93:607–613, 2023. https://doi.org/10.1016/j.matpr.2023.03.636
P. Hála, P. Kheml, A. Perrot, et al. Lightweight protective sandwich structure with UHPC core. International Interactive Symposium on Ultra-High Performance Concrete 3(1):16, 2023. https://doi.org/10.21838/uhpc.16647
P. Si, Y. Liu, J. Yan, et al. Effect of polyurea layer on ballistic behavior of ceramic/metal armor. Structures 48:1856–1867, 2023. https://doi.org/10.1016/j.istruc.2023.01.089
Q. Liu, B. Guo, P. Chen, et al. Investigating ballistic resistance of CFRP/polyurea composite plates subjected to ballistic impact. Thin-Walled Structures 166:108111, 2021. https://doi.org/10.1016/j.tws.2021.108111
P. Zhang, Z. Wang, P. Zhao, et al. Experimental investigation on ballistic resistance of polyurea coated steel plates subjected to fragment impact. Thin-Walled Structures 144:106342, 2019. https://doi.org/10.1016/j.tws.2019.106342
S. A. Tekalur, A. Shukla, K. Shivakumar. Blast resistance of polyurea based layered composite materials. Composite Structures 84(3):271–281, 2008. https://doi.org/10.1016/j.compstruct.2007.08.008
M. R. Amini, J. Isaacs, S. Nemat-Nasser. Investigation of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments. Mechanics of Materials 42(6):628–639, 2010. https://doi.org/10.1016/j.mechmat.2009.09.008
M. R. Amini, J. Simon, S. Nemat-Nasser. Numerical modeling of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments. Mechanics of Materials 42(6):615–627, 2010. https://doi.org/10.1016/j.mechmat.2009.09.009
M. R. Amini, J. B. Isaacs, S. Nemat-Nasser. Experimental investigation of response of monolithic and bilayer plates to impulsive loads. International Journal of Impact Engineering 37(1):82–89, 2010. https://doi.org/10.1016/j.ijimpeng.2009.04.002
H. Hou, C. Chen, Y. Cheng, et al. Effect of structural configuration on air blast resistance of polyurea-coated composite steel plates: Experimental studies. Materials & Design 182:108049, 2019. https://doi.org/10.1016/j.matdes.2019.108049
D. Mohotti, P. L. N. Fernando, D. Weerasinghe, A. Remennikov. Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates. Defence Technology 17(6):1895–1904, 2021. https://doi.org/10.1016/j.dt.2020.11.009
S. Jia, C. Wang, W. Xu, et al. Experimental investigation on weak shock wave mitigation characteristics of flexible polyurethane foam and polyurea. Defence Technology 31:179–191, 2024. https://doi.org/10.1016/j.dt.2023.06.013
J. LeBlanc, N. Gardner, A. Shukla. Effect of polyurea coatings on the response of curved E-Glass/Vinyl ester composite panels to underwater explosive loading. Composites Part B: Engineering 44(1):565–574, 2013. https://doi.org/10.1016/j.compositesb.2012.02.038
Z. Bažantová, K. Kolář, P. Konvalinka, J. Litoš. Multifunctional high-performance cement based composite. Key Engineering Materials 677:53–56, 2016. https://doi.org/10.4028/www.scientific.net/KEM.677.53
Z. Bažantová, K. Kolář, P. Konvalinka, et al. Controlled hardening of silicate binders for the optimization of high performance composites. Key Engineering Materials 722:281–285, 2016. https://doi.org/10.4028/www.scientific.net/KEM.722.281
International Organization for Standardization. ISO 1183-1:2019. Plastics – Methods for determining the density of non-cellular plastics, 2019.
International Organization for Standardization. ISO 34-1:2022. Rubber, vulcanized or thermoplastic – Determination of tear strength, 2022. 5th edn.
ASTM. ASTM D1708-18. Standard test method for tensile properties of plastics by use of microtensile specimens, 2018. https://doi.org/10.1520/D1708-18
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Alžběta Měrková, Přemysl Kheml, Alexandre Perrot, Petr Hála
This work is licensed under a Creative Commons Attribution 4.0 International License.
