Surface Ageing and Visual Changes of Architectural Concrete under Accelerated Exposure
DOI:
https://doi.org/10.14311/CEJ.2026.03.0022Keywords:
Architectural Concrete, Surface Ageing, Visual Durability, Recycled Aggregate Concrete, High-Performance Concrete, Surface TreatmentAbstract
Architectural concrete is expected to provide not only structural performance but also long-term aesthetic quality. While concrete durability has been widely investigated, the visual ageing of exposed concrete surfaces has received considerably less attention. This study evaluates the visual durability of four concrete mixtures: a reference concrete (REF), two recycled aggregate concretes containing crushed concrete aggregate (RACC) and crushed clay brick aggregate (RACB), and a high-performance concrete (HPC). Ground surfaces, untreated or protected with transparent polyurethane or silane-based coatings, were subjected to accelerated freeze–thaw cycling, carbonation and repeated urea exposure. Surface changes were systematically documented under visible and ultraviolet (UV) light and evaluated together with conventional durability measurements.
All investigated mixtures exhibited high resistance to accelerated ageing. Freeze–thaw cycling caused only limited permanent visual deterioration, while carbonation and urea exposure resulted mainly in subtle colour changes without significant surface damage. The recycled aggregate concretes showed freeze–thaw performance comparable to the reference concrete despite greater carbonation depths, whereas HPC demonstrated the highest overall stability. UV illumination revealed minor surface changes that were not detectable under visible light.
The results show that conventional durability indicators alone do not fully describe the long-term performance of architectural concrete. Combining accelerated durability testing with systematic visual assessment provides a comprehensive approach for evaluating both structural durability and long-term aesthetic performance.
Received: 20.07.2026
Received in revised form: 08.09.2026
Accepted: 29.09.2026
Downloads
References
[1] Neville, A.M. Properties of Concrete; 5th ed.; Pearson Education Limited: Harlow, UK, 2011.
[2] Mehta, P.K.; Monteiro, P.J.M. Concrete: Microstructure, Properties, and Materials; 4th ed.; McGraw-Hill Education: New York, NY, USA, 2014.
[3] EN 206:2013+A2:2021. Concrete—Specification, Performance, Production and Conformity.
[4] ACI Committee 201. ACI 201.2R: Guide to Durable Concrete; American Concrete Institute: Farmington Hills, MI, USA.
[5] Aïtcin, P.-C. High Performance Concrete; CRC Press: London, UK, 1998.
[6] Xiao, J.; Li, L.; Tam, V.W.Y.; Li, H. The state of the art regarding the long-term properties of recycled aggregate concrete. Structural Concrete 2014, 15, 3–12. https://doi.org/10.1002/suco.201300024.
[7] Silva, R.V.; de Brito, J.; Dhir, R.K. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production. Construction and Building Materials 2014, 65, 201–217.
[8] Zhang, X.; et al. Modification of recycled aggregate and conservation and application of recycled aggregate concrete: A review. Construction and Building Materials 2024, 431, 136567.
[9] ACI Committee 303. ACI PRC-303-25: Cast-in-Place Architectural Concrete Practice—Guide; American Concrete Institute, 2025.
[10] fib Bulletin No. 118. Technology and Aesthetics of Visual Concrete Surfaces; Fédération internationale du béton (fib), Lausanne, Switzerland, 2025.
[11] Basheer, P.A.M.; Basheer, L.; Cleland, D.J.; Long, A.E. Surface treatments for concrete: Assessment methods and reported performance. Construction and Building Materials 1997, 11(7–8), 413–429.
[12] Pan, X.; Shi, Z.; Shi, C.; Ling, T.-C.; Li, N. A review on concrete surface treatment Part I: Types and mechanisms. Construction and Building Materials 2017, 132, 578–590.
[13] Pan, X.; Shi, Z.; Shi, C.; Ling, T.-C.; Li, N. A review on concrete surface treatment Part II: Performance. Construction and Building Materials 2017, 133, 81–90.
[14] Dai, J.-G.; Yokota, H.; Wittmann, F.H.; Zhang, P. Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracks. Cement and Concrete Composites 2010, 32(2), 101–109.
[15] Thissen, P.; Bogner, A.; Dehn, F. Surface treatments on concrete: An overview on organic, inorganic and nano-based coatings and an outlook about surface modification by rare-earth oxides. RSC Sustainability 2024, 2, 2092–2124. https://doi.org/10.1039/D3SU00482A.
[16] Liu, Z.; Hansen, W. Effect of hydrophobic surface treatment on freeze–thaw durability of concrete. Cement and Concrete Composites 2016, 69, 49–60.
[17] Christodoulou, C.; Goodier, C.I.; Austin, S.A.; Webb, J.; Glass, G.K. Long-term performance of surface impregnation of reinforced concrete structures with silane. Construction and Building Materials 2013, 48, 708–716.
[18] Richard, P.; Cheyrezy, M. Composition of reactive powder concretes. Cement and Concrete Research 1995, 25(7), 1501–1511.
[19] Richard, P.; Cheyrezy, M. Reactive powder concretes with high ductility and 200–800 MPa compressive strength. In Proceedings of the 4th International Symposium on the Utilization of High-Strength/High-Performance Concrete, Paris, 1996.
[20] Papadakis, V.G.; Vayenas, C.G.; Fardis, M.N. Fundamental modeling and experimental investigation of concrete carbonation. ACI Materials Journal 1991, 88(4), 363–373.
[21] Lemaire, G.; Escadeillas, G.; Ringot, E. Evaluating concrete surfaces using an image analysis process. Construction and Building Materials 2005, 19(8), 604–611. https://doi.org/10.1016/j.conbuildmat.2005.01.025.
[22] Annerel, E.; Taerwe, L. Methods to quantify the colour development of concrete exposed to fire. Construction and Building Materials 2011, 25(10), 3989–3997. https://doi.org/10.1016/j.conbuildmat.2011.04.033.
[23] López, A.; Guzmán, G.A.; Di Sarli, A.R. Color stability in mortars and concretes. Part 2: Study on architectural concretes. Construction and Building Materials 2016, 123, 248–253. https://doi.org/10.1016/j.conbuildmat.2016.06.147.
[24] López, A.; Guzmán, G.A.; Di Sarli, A.R. Color stability in mortars and concretes. Part 1: Study on architectural mortars. Construction and Building Materials 2016, 120, 617–622. https://doi.org/10.1016/j.conbuildmat.2016.05.133.
[25] Bader, T.; Lackner, R. Acrylic surface treatment applied to architectural High-Performance Concrete (HPC): Identification of potential pitfalls on the way to long-lasting protection. Construction and Building Materials 2020, 237, 117415. https://doi.org/10.1016/j.conbuildmat.2019.117415.
[26] Banerjee, A.; et al. Colour-stability analysis for estimation of deterioration in concrete due to chemical attack. Construction and Building Materials 2022.
[26] Jesus, C.F.; Arruda Junior, E.S.; Braga, N.T.S.; Silva Junior, J.A.; Barata, M.S. Coloured concrete produced from low-carbon cements: Mechanical properties, chromatic stability and sustainability. Journal of Building Engineering 2023, 67, 106018. https://doi.org/10.1016/j.jobe.2023.106018.
[27] López, A.; Pittori, A.; Di Sarli, A.R. Architectural self-compacting concretes and their color stability for 10 years. Construction and Building Materials 2024, 451, 138650. https://doi.org/10.1016/j.conbuildmat.2024.138650.
[28] Šliogeris, I.; Rekus, D.; Juočiūnas, S.; Borg, R.P.; Daukšys, M. Investigating reinforcement shadow visibility on formed concrete surfaces using visual inspection and colour variation analysis. Buildings 2025, 15(7), 1140. https://doi.org/10.3390/buildings15071140.
[29] CIE. Colorimetry—Part 4: CIE 1976 L*a*b* Colour Space; ISO/CIE 11664-4:2019; International Organization for Standardization and International Commission on Illumination: Geneva/Vienna, 2019.
[30] CIE. Colorimetry, 4th ed.; CIE 015:2018; International Commission on Illumination: Vienna, Austria, 2018.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Tomas Vlach, Zuzana Jirkalová, Petr Hájek
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
