RESEARCH ON MODELING AND OPTIMIZATION PROGRAM OF LONG-SPAN HYBRID GRID HANGAR BASED ON LEVERAGE PRINCIPLE
DOI:
https://doi.org/10.14311/CEJ.2021.01.0012Keywords:
Hangar structure, Leverage, SAP2000, Optimization designAbstract
A long-span hybrid grid hangar structure and a modeling method for the long-span hybrid grid hangar structure based on the principle of leverage are proposed in this paper. Based on the SAP2000 spatial structure design software, the C# language was used to develop a plug-in to automatically create a long-span hybrid grid structure based on the principle of leverage, which realized the automatic generation by inputting parameters such as the span of the hangar structure, the number of horizontal grids, and the number of vertical grids. The optimization design method of the long-span hybrid grid structure based on particle swarm algorithm is proposed. SAP2000 software is used and the C# language is used to develop the optimization design program of the long-span hybrid grid structure based on the principle of leverage. The optimization design is carried out, and the optimization results show that the program can reduce the thickness of the roof and reduce the vertical displacement at the opening of the hangar roof on the basis of meeting the current specifications.
Downloads
References
Lang F, 2005. Research on the selection and design of long-span aircraft maintenance warehouse [Master’s thesis]. Beijing: Beijing University of Technology.
Wei X, Ma F, Li G, 2017. Research progress on the selection of aviation-type long-span maintenance hangar structure and its anti-seismic and shock-resistant performance. Journal of Ssmological Research, vol. 40:75-81.
Liu X, 1996. The development of China's grid structure in the past ten years. In: Proceedings of the 6th Space Structure Academic Conference.
Hao Y, et al., 2019. Construction technology of long-span complex space composite structure in Beijing Daxing International Airport hangar. Construction Technology, vol. 48: 115-119.
Zhu D, 2008. Research on the long-span structure design of Beijing A380 hangar. China Civil Engineering Journal, vol. 2: 10-17.
Wang X, Lu H. The development of ANSYS parametric design and optimization design program for space grid. In: Fifth National Symposium on Modern Structural Engineering.
Wang Q. Research on the overall stability of the three-story oblique quadrangular pyramid grid structure of the long-span maintenance hangar [Master’s thesis]. Jinan: Jinan University.
Qin Y, 2020. A two-stage optimization approach for aircraft hangar maintenance planning and staff assignment problems under MRO outsourcing mode. Computers & Industrial Engineering, 106607.
Qiu Y, 2011. SAP2000 API and .NET technology in the rapid modeling of reticulated shell. Guangdong Civil Engineering and Architecture, vol. 1: 28-31.
Tayfur B, Can Ö, 2018. Farklı yüksekliğe sahip boşluklu perde duvarlara ait davranış eğrilerinin SAP2000 OAPI ile elde edilmesi. Akademik Platform Mühendislik ve Fen Bilimleri Dergisi, vol. 6: 84-91.
Zhou J, Lin L, Zhang J, 2013. Application of SAP2000 API and .NET technology in rapid equipment foundation modeling. Building Structure, vol. S1: 846-849.
Chen QJ, et al., 2014. Application of SAP2000 API and. NET framework for reliability assessment of RC structures. Appl Mech Mater, vol. 578: 1482-1488.
Sotiropoulos S, Lagaros ND, 2020. Topology Optimization of Framed Structures using SAP2000. Procedia Manufacturing, vol. 44: 68-75.
Lagaros ND, Vasileiou N, Kazakis G, 2019. AC# code for solving 3D topology optimization problems using SAP2000. Optimization and Engineering, vol. 20: 1-35.
Leung A, Zhang H, 2009. Particle swarm optimization of tuned mass dampers. Engineering Structures, vol. 31: 715-728
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Civil Engineering Journal
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).