SELF FIBER COMPACTING CONCRETE (SFCC) PROPERTIES INCORPRATED WITH SILICA FUME AND FIBER

Authors

  • Hakas Prayuda Universitas Muhammadiyah Yogyakarta, Faculty of Engineering , Department of Civil Engineering, Tamantirto Kasihan Bantul Yogyakarta, Indonesia
  • Fanny Monika Universitas Muhammadiyah Yogyakarta, Faculty of Engineering , Department of Civil Engineering, Tamantirto Kasihan Bantul Yogyakarta, Indonesia
  • Martyana Dwi Cahyati Universitas Muhammadiyah Yogyakarta, Faculty of Engineering , Department of Civil Engineering, Tamantirto Kasihan Bantul Yogyakarta, Indonesia
  • Fadillawaty Saleh Universitas Muhammadiyah Yogyakarta, Faculty of Engineering , Department of Civil Engineering, Tamantirto Kasihan Bantul Yogyakarta, Indonesia

DOI:

https://doi.org/10.14311/CEJ.2020.01.0005

Keywords:

Self-fiber Compacting Concrete, Silica fume, Compressive strength, Tensile strength, Flexural strength, Fresh properties

Abstract

SFCC is one of the self-compacting concrete innovations. With the presence of fiber, this concrete is not only famous for its own compaction process but also has good tensile strength and good ductility when compared to normal Self Compacting Concrete (SCC). Taking into account the environmental and economic factors of the use of cement as a major component in the manufacture of SFCC, this research is innovating by reducing the use of cement and replacing it with the use of silica fume. The silica fume variations used in this study include 5%, 10%, and 15% with the use of 1% nylon fiber. Fresh properties testing including slump flow, T50, V - Funnel, and L - Box for silica fume variations were conducted in this study. Not only that, compressive strength, tensile strength and flexural strength testing are carried out to study the mechanical properties of the SHCC against silica fume variations. The results show that the use of silica fume variations will affect the fresh properties and mechanical properties of the SFCC concrete. The use of 5% silica fume in SFCC concrete is the optimum use to get the optimum compressive strength.

Downloads

Download data is not yet available.

References

V. Anusuya, C. V. Saranya, and S. N. K. Pravin, “Comparison of the performance of self-compacting concrete”, 6th National Conference on Innovative Practices in Construction and Waste Management, pp. 181-185, April 2017.

M. M. Kamal, M. A. Safan, A. A. Bashandy, and A. M. Khalil, “Experimental Investigation on the behavior of normal strength and high strength self-curing self-compacting concrete”, Journal of Building Engineering, Vol. 16, pp. 79-93, 2018.

D. Raharjo, A. Subakti, Tavio, Mixed Concrete Optimization Using Fly Ash, Silica Fume and Iron Slag on the SCC’s Compressive Strength. In: Proccedings of the 2nd Internasional Conference on Rehabilitation and Maintanance in Civil Engineering, Procedia Engineering, 827-839.

C. Shi. Design and application of self-compacting lightweight concrete. In: SCC’2005-China: 1st international symposium on design, performance and use of self-consolidating concrete. RILEM Publications SARL; 2005.

C. Shi, and Y. Wu, Mixture proportioning and properties of self-consolidating lightweight concrete containing glass powder. ACI Mater J 2005;102(5).

H. Prayuda, F Saleh, T. I. Maulana, F. Monika, Fresh and mechanical properties of self-compacting concrete with coarse aggregate replacement using Waste of Oil Palm Shell, IOP Conforence Series: Materias Science and Engineering, Vol. 352. 2018.

A. Khaloo, E. Molaei, R. P. Hosseini, and H. Tahsiri, “Mechanical performance of self-compacting concrete reinforced with steel fibers”, Construction and Building Materials, Vol. 51, pp. 179-186, 2014.

M. H. Beigi, J. Berenjian, O. L. Omran, A. S. Nik, and I. M. Nikbin, “An experimental survey on combined effects of fibers and nanosilica on the mechanical, rheological, and durability properties of self-compacting concrete”, Materials and Design, Vol. 50, pp. 1019-1029, 2013.

A. Pozolo, and B. Andrawes, Analytical prediction of transfer length in prestressed self-consolidating concrete girders using pull-out test result”, Construction and Building Materials, Vol. 25, pp. 1026-1036, 2011.

O. Gencel, “Mechanical properties of self-compacting concrete reinforced with polypropylene fibres” Materials Research Innovations, Volume 15, No 3,2011.

B. Afriandini, F. Monika, F. Saleh, H. Prayuda, M. D. Cahyati, and S. I. K. Djaha, “Fresh and Hardened Properties of Self Fiber Compacting Concrete (SFCC) Incorporated with Zeolite and Nylon”, IOP Conference Series: Materials Science and Engineering, Vol 771, 2020.

G. S. Vijaya, V.G. Ghorpadeb, H.S. Raoc, The Behaviour of Self Compacting Concrete With Waste Plastic Fibers When Subjected To Chloride Attack, In: Proceedings 5 of Materials Today, pp. 1501–1508, 2018.

Kandaswamy and Murugesan, “Fibre reinforced self-compacting concrete using domestic waste plastic fibres”, Journal of Engineering and applied Sciences, Volume 7, pg 405-410, 2012.

P. Aggarwal, R. Siddique, Y. Aggarwal, and S. M. Gupta, “Self-Compacting Concrete Procedure for Mix Design”, Leonardo Electronic Journal of Practices and Technologies, Vol. 12, pp. 15-24, 2008.

European Federation of National Trade Associations Representing Producers and Applicator of Specialist Building Products (EFNARC), “Specification and Guidelines for Self-Compacting Concrete”, Hampshire, U.K, 2002.

ASTM C39/ C39M-18, ‘Standard Test Method for Compressive Strength of cylindrical Concrete Specimens’, ASTM International, West Conshohocken, PA, 2018.

ASTM C496/ C496M -17, “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”, ASTM International, West Conshohocken, PA, 2017.

ASTM C293/ C293M -16, ‘Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center Point Loading)’, ASTM International, West Conshohocken, PA, 2016.

Downloads

Published

2020-04-30

How to Cite

Prayuda, H., Monika, F., Cahyati, M. D., & Saleh, F. (2020). SELF FIBER COMPACTING CONCRETE (SFCC) PROPERTIES INCORPRATED WITH SILICA FUME AND FIBER. Stavební Obzor - Civil Engineering Journal, 29(1). https://doi.org/10.14311/CEJ.2020.01.0005

Issue

Vol. 29 No. 1 (2020)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).