NUMERICAL INVESTIGATION OF FRP-STRENGTHENED REINFORCED CONCRETE BEAMS AT HIGH TEMPERATURES
DOI:
https://doi.org/10.14311/CEJ.2019.02.0018Keywords:
Fire performance, Thermal insulation, Numerical modeling, Fiber reinforced polymers (FRP), Reinforced concrete beams; Flexural strengtheningAbstract
Fiber reinforced polymers (FRP) strengthening systems are mainly used to retrofit existing and deficient structural members. The performance of such strengthened structures at elevated temperatures is a critical issue that threatens the safety of the structure. Published research includes experimental testing of reinforced concrete (R.C) beams strengthened using FRP and subjected to fire tests. However, there is a need for numerical tools that simulate the performance of these FRP-strengthened elements in case of fire. This research work presents numerical modelling and nonlinear analysis conducted to assess the performance of reinforced concrete beams strengthened with externally bonded carbon FRP sheets when subjected to standard fire conditions. Finite element model using the general purpose software ANSYS 12.1 is developed and validated with experimental results published in the literature by other researchers.
The developed finite element model achieved good correlation with the experimental results. Further, application of the validated finite element model is extended into a parametric study to explore the influence of different variables on the performance of the FRP system when subjected to fire. Different aggregate types, moisture contents, concrete cover thickness, insulation material types and insulation material thickness are included in the study. The developed finite element model is thus regarded a valid and economical alternative to experiments for prediction of the performance of FRP strengthened and insulated R.C beams under fire conditions. Additionally, it can be used for estimation of the fire rating of such structures as well as for design of adequate fire protection layers.
Downloads
References
American Concrete Institute (ACI), ACI 440.2R-08, “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures”, ACI Committee 440, Farmington Hills, MI, USA, 2008.
ECP Committee 208, ECP 208-05: “Egyptian code of practice for the use of fiber reinforced polymer in the construction field”, ECP Committee 208, Ministry of Housing and Urban Communities, Egypt, 2005.
Blontrock, H., Taerwe, L., and Vandevelde, P., “Fire tests on concrete beams strengthened with fiber composite laminate”, Third Ph.D. Symposium, Vienna, Austria, (2000), 10 pp.
Blontrock, H., Taerwe, L, and Vandevelde, P., “Fire testing of concrete slabs strengthened with fiber composite laminate”, 5th Annual Symposium on Fiber-Reinforced-Plastic Reinforcement for Concrete Structures (FRPRCS-5), London, U.K., 2001, pp. 547–556.
Williams, B., Bisby, L., Green, M., Kodur, V.K.R., and Su, J, Z., “An investigation on fire performance of FRP strengthened RC Beams”, 8th International Symposium on Fire Safety Science, Beijing, 2005, pp. 247–258.
Gamage, J., Al-Mahaidi, R., and Wong, M.B., “Bond characteristics of CFRP plated concrete members under elevated temperatures”, Composite Structures, 75(1-4), 2006, pp.199–205.
Klamer, E.L., Hordijk, D.A. and Hermes, M.C.J., “The influence of temperature on RC beams strengthened with externally bonded CFRP reinforcement”, Heron, 53(3), 2008, pp. 157–185.
Yu, B., and Kodur, V.K.R., "Effect of temperature on strength and stiffness properties of near-surface mounted FRP reinforcement", Composites Part B: Eng. 58 (2014) 510-517.
Firmo, J.P., Pitta, D, Correia, J.R., Tiago, C., and Arruda, M.R.T., "Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures", Cement Concrete Composites,60 (2015) 44-54.
Firmo, J.P., and Correia, J.R., "Fire behaviour of thermally insulated RC beams strengthened with EBR-CFRP strips: experimental study", Composite Structures, 122 (2015) 144-154.
O. El-Mahdy., G. Hamdy and M. Abdullah, (2018), "Numerical Investigation of The Performance of Insulated FRP-Strengthened Reinforced Concrete Beams in Fire", The Civil Engineering Journal (CEJ), Stavebni Obzor, Faculty of Civil Engineering, CTU in Prague, Czech Republic, No. 46, Issue 4, pp. 573-586
Gao, W.Y., Dai, J.G., Teng, J.G., and Chen, G.M., "Finite element modeling of reinforced concrete DOI 10.14311/CEJ.2019.02.0018 232
beams exposed to fire", Engineering Structures, 52 (2013) 488-501.
Dai, J., Gao, W., and Teng, J., "Finite element modeling of insulated FRP-strengthened RC beams exposed to fire", Journal of Composites in Construction, 19(2) (2015)1-15.
Arruda, M.R.T., Firmo, J.P., Correia, J.R., and Tiago, C., "Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures", Engineering Structures, 110 (2016) 233–243.
Bisby, L.A., “Fire Behavior of Fiber-Reinforced Polymer Reinforced or Confined Concrete”, Ph.D. thesis, Department of Civil Engineering, Queen's University, Kingston, Canada, 2003.
Bisby, L.A., Green, M.F., and Kodur, V.K.R., “Modeling the behavior of FRP-confined concrete columns exposed to fire”, J.Compos. Constr., 9(1), 2005, pp. 15–24.
Bai, Y., Keller, T, and Vallée, T., "Modeling of stiffness of FRP composites under elevated and high temperatures”, Compos. Sc. Techn., 68 (15-16), 2008, pp. 3309–3106.
Hawileh, R., A., Naser, M., Zaidan, W., and Rasheed, H. A., “Modeling of insulated CFRP strengthened reinforced concrete T-beam exposed to fire”, Eng. Struct., 31(12), 2009, pp. 3072–3079
ANSYS. Finite Element Computer Code. Version 12.1.0. ANSYS Inc., Canonsburg, PA, 2009.
Harmathy, T.Z., “Fire Safety Design and Concrete, Concrete Design and Construction Series”, Longman, UK, 1993.
Griffis, C. A., Masmura, R.A., and Chang, C.I., “Thermal response of graphite-epoxy composite subjected to rapid heating”, Journal of Composite Materials., Vol. 15 (1981), pp. 427-442.
Eurocode 2. EN 1992-1-2: Design of concrete structures. Part 1-2: General rules- Structural fire design, European Committee for Standardization, Brussels, Belgium, 2004.
Williams, B., Kodur, V.K.R., Green, M.F., and Bisby, L.,”Fire endurance of fiber-reinforced polymer strengthened concrete T-beams, J. ACI Struct; 105(1), 2008, pp. 60–67.
Cramer, S.M., Friday, O.M., White, R.H., and Sriprutkiat, G., “Mechanical properties of gypsum board at elevated temperatures”, Fire and Materials, 2003, pp. 33–42.
Park, S. H., Manzello, S., L., Bentz, D., P., and Mizukami, T., “Determining thermal properties of gypsum board at elevated temperatures”, Fire and Materials, (2009), pp. 237-250.
American Society for Testing and Materials (ASTM). ASTM E119: Standard Test Methods for Fire Tests of Building Construction and Materials, West Conshohocken, PA, USA, 2007.
Eurocode 3. EN 1993-1-2: Design of steel structures. Part 1-2: General rules- Structural fire design, European Committee for Standardization, Brussels, Belgium, 2005.
American Concrete Institute (ACI), ACI 318-
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).