PHYSICAL AND MECHANICAL CHARACTERISTICS OF BUILDING MATERIALS OF HISTORIC BUILDINGS

Authors

  • Jiří Witzany CTU in Prague, Faculty of Civil Engineering, Deparment of Building Structures, Prague, Thákurova 7, Czech Republic
  • Radek Zigler CTU in Prague, Faculty of Civil Engineering, Deparment of Building Structures, Prague, Thákurova 7, Czech Republic
  • Tomáš Čejka CTU in Prague, Faculty of Civil Engineering, Deparment of Building Structures, Prague, Thákurova 7, Czech Republic
  • Pavel Pospíšil VŠB Ostrava, Faculty of Civil Engineering, Department of Geotechnics and Underground Engineering, L. Podéště 1875/17, Ostrava – Poruba, Czech Republic
  • Milan Holický CTU in Prague, Klokner Institute, Prague, Šolínova 7, Czech Republic
  • Jan Kubát CTU in Prague, Faculty of Civil Engineering, Deparment of Building Structures, Prague, Thákurova 7, Czech Republic
  • Aneta Maroušková CTU in Prague, Faculty of Civil Engineering, Deparment of Building Structures, Prague, Thákurova 7, Czech Republic
  • Klára Kroftová CTU in Prague, Faculty of Civil Engineering, Deparment of Architecture, Prague, Thákurova 7, Czech Republic

DOI:

https://doi.org/10.14311/CEJ.2017.04.0029

Keywords:

physical and mechanical characteristics, unreliability, masonry components, heterogeneous nature, variable factors

Abstract

The article presents partial results of laboratory research into physical and mechanical characteristics of materials most commonly used as walling units in masonry structures of historic and heritage buildings. Core boreholes and specimens for the laboratory research of selected characteristics were sampled from accessible places of historic buildings, which had not been restored or reconstructed.
The results of the research brought new knowledge about the unreliability (variance) of the properties of historical, mainly natural building materials, and, at the same time, pointed out the need for further research and extension of knowledge necessary for the assessment of residual physical and mechanical characteristics of historic masonry structures.

Downloads

Download data is not yet available.

References

Witzany, J. et al.: Chemická a biochemická degradace Karlova mostu, analýza odolnosti a bezpečnosti kamenné mostní konstrukce při povodni, průzkum základového zdiva a základů mostních pilířů, Stavební obzor, 12, 2003, No. 6, pp. 161–180.

Kotlík, P., Šrámek, J., Kaše, J.: Opuka, STOP, Praha, 2000, ISBN 80-902668-5-1.

Hanykýř, Vl., Kloužková, A., Bouška, P., Vokáč, M.: Stárnutí pórovitého keramického střepu, In: SILIS - Keramický zpravodaj, Vol. 25, No. 6/2009, pp. 5-10, Praha, ISSN 1210-2520.

Heidingsfeld, V.: Fyzikální a chemická koroze stavebních materiálů. In: Voda nepřítel památek. Odborný seminář STOP. Praha: 1997, pp. 9-12

Witzany, J., Čejka, T., Výzkum fyzikálně mechanických vlastností porézních zdících prvků, Stavební obzor. 2008, 17(10), 289-292. ISSN 1210-4027.

Witzany, J., Čejka, T., Kroftová, K., Šmidtová, M., The effect of degradation processes on the serviceability of building materials of historic buildings, The Civil Engineering Journal. 2016,(3), ISSN 1805-2576.

Kotlík, P. et al.: Stavební materiály historických objektů – Materiály, koroze, sanace, Vydavatelství VŠCHT, 1999, ISBN 80-7080-347-9.

Hošek, J., Stavební materiály pro rekonstrukce. 1st edition 1996. ISBN 80-01-01156-9.

Neubergová, S., Analýza vlivu vybraných degradačních činitelů na fyzikálně mechanické vlastnosti přírodního kamene, DDP, Praha: České vysoké učení technické v Praze, 2015.

Holický, M., Introduction to Probability and Statistics for Engineers, Heidelberg: Springer, 2013. ISBN 978-3-642-38299-4.

Holický, M., Aplikace teorie pravděpodobnosti a matematické statistiky, Praha: České vysoké učení technické v Praze, Kloknerův ústav, 2015. ISBN 978-80-01-05803-9.

Downloads

Published

2017-12-31

How to Cite

Witzany, J., Zigler, R., Čejka, T., Pospíšil, P., Holický, M., Kubát, J., Maroušková, A., & Kroftová, K. (2017). PHYSICAL AND MECHANICAL CHARACTERISTICS OF BUILDING MATERIALS OF HISTORIC BUILDINGS. Stavební Obzor - Civil Engineering Journal, 26(4). https://doi.org/10.14311/CEJ.2017.04.0029

Issue

Vol. 26 No. 4 (2017)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).