FAULT-RELATED INSTABILITY PROBLEMS OF TUNNELS - THE HOST ROCK SLIP CRITERION AND CHARACTERISTICS OF THE TUNNELING-INDUCED SHEAR DISPLACEMENTS
DOI:
https://doi.org/10.14311/CEJ.2017.04.0036Keywords:
Tunnel, Fault-related instability problem, Rock slip criterion, Fault shear strength, Tunnelling-induced shear displacementAbstract
As one of the fault-related instability problems of tunnels, rock slip along fault plane is closely related to the shear strength of a fault, and usually causes irrecoverable and sometimes catastrophic engineering problems. In this paper, based on continuum assumption and Coulomb-slip failure, a criterion to evaluate rock slip along the fault plane was proposed for a circular tunnel in rock masses containing a fault. A mathematical equation that describes the relationship between required shear strength of a fault and horizontal stress ratio, fault spatial extension and location was established. From the equation, the influences of the important parameters on the required shear strength of a fault was analysed after a numerical validation was performed. Besides, the effects of fault spatial extension and location on the tunnelling-induced shear displacements were characterized through numerical models. Characteristics of the tunnelling-induced shear displacements at the excavation wall indicated that fault location with respect to the tunnel dominates the nonuniform rock deformations at excavation wall, and larger fault dip angles could lead to larger shear displacements in some specific pair cases. The presented investigation provides both a deeper insight into the instability problems of tunnels related to a fault and a guideline for tunnel support design.
Downloads
References
Bruneau G., Tyler D., Hadjigeorgiou J, Potvin Y., 2003. Influence of faulting on a mine shaft—a case
study: part I—Background and instrumentation. International Journal of Rock Mechanics and Mining
Sciences, vol. 40: 95-111
Meng L., Li T., Jiang Y., Wang R, Li Y., 2013. Characteristics and mechanisms of large deformation in
the Zhegu mountain tunnel on the Sichuan–Tibet highway. Tunnelling and Underground Space Technology,
vol. 37: 157-164
Kun M., Onargan T., 2013. Influence of the fault zone in shallow tunneling: A case study of Izmir Metro
Tunnel. Tunnelling and Underground Space Technology, vol. 33: 34-45
Suorineni F., Tannant D., Kaiser P., 1999. Determination of fault-related sloughage in open stopes.
International Journal of Rock Mechanics and Mining Sciences, vol. 36: 891-906
Brekke T.L., Howard T.R., 1972. Stability problems caused by seams and faults. International Journal
of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, vol. 12: 95
Nagelhout A.C.G., Roest J.P.A., 1997. Investigating fault slip in a model of an underground gas storage
facility. International Journal of Rock Mechanics & Mining Sciences, vol. 34: 212.e211–212.e214
Li D., Xia B.W, Hao C., Bai S.W., 2009. Research on stability of tunnel in anisotropic layered rockmass
with low inclination angle bedding by model test. Rock & Soil Mechanics, vol. 30: 1933-1938
Brekke T.L., Howard T.R., 1974. Functional classification of gouge materials from seams and faults in
relation to stability problems in underground openings : 65F, 18T, 84R. US BUR. MINES, TECHNICAL
REPORT, 1973. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, vol.
: 62-62
Moretto, O., 1993. A case history in Argentina – rock mechanics for the underground works in the
pumping storage development of Rio Grande No. 1 Comprehensive Rock Engineering, vol. 5. Pergamon
Press, Oxford
Barton N., Lien R., Lunde J. (1974) Engineering classification of rock masses for the design of tunnel
support. Rock Mechanics, vol. 6: 189-236
Brady, B.H.G., Brown, E.T., 1993. Rock Mechanics for Underground Mining, second ed. Chapman &
Hall, London
Goodman, R.E., Shi, G.H., 1985. Block Theory and its Application to Rock Engineering. Prentice-Hall,
Englewood Cliffs, NJ. p. 338
Sun X.L., Wang H.Z., 2006. 3D FEM analysis of horizontal jet grouting prelining in a tunnel under asymmetric loads. Tunnelling & Underground Space Technology, vol. 21: 366-367
Xiao J.Z., Dai F.C., Wei Y.Q., Min H., Xu C., Tu X.B., Wang M.L., 2014. Cracking mechanism of secondary lining for a shallow and asymmetrically-loaded tunnel in loose deposits. Tunnelling & Underground Space Technology, vol. 43: 232-240
Zhou X.J., Gao Y., Li Z.L., 2006. Experimental study on the uneven rock pressure and its distribution applied on a tunnel embedded in geologically bedding strata. Modern Tunnelling Technology, vol. 41: 12-21
Huang F., Zhu H., Xu Q., Cai Y., Zhuang X., 2013. The effect of weak interlayer on the failure pattern of rock mass around tunnel – Scaled model tests and numerical analysis. Tunnelling and Underground Space Technology, incorporating Trenchless Technology Research, vol. 35: 207-218
Zhu Z.Q., Qian S., Mei S.H., Zhang Z.R., 2009. Improved ubiquitous-joint model and its application to underground engineering in layered rock masses. Rock & Soil Mechanics, vol. 30: 3115-3121+3132
Bhasin R., Hoeg K., 1998. Parametric study for a large cavern in jointed rock using a distinct element model (UDEC—BB). International Journal of Rock Mechanics & Mining Sciences, vol. 35: 17-29
Jeon S., Kim J., Seo Y., Hong C., 2004. Effect of a fault and weak plane on the stability of a tunnel in rock—a scaled model test and numerical analysis. International Journal of Rock Mechanics & Mining Sciences, vol. 41: 658-663
Yeung M.R., Leong L.L., 1997. Effects of joint attributes on tunnel stability. International Journal of Rock Mechanics & Mining Sciences, vol. 34: 348.e341–348.e318
Hao Y.H., Azzam R., 2005. The plastic zones and displacements around underground openings in rock masses containing a fault. Tunnelling & Underground Space Technology, vol. 20: 49-61
Wang X., Kulatilake P.H.S.W., Song W.D., 2012. Stability investigations around a mine tunnel through three-dimensional discontinuum and continuum stress analyses. Tunnelling and Underground Space Technology, incorporating Trenchless Technology Research, vol. 32: 98-112
Jia P., Tang C.A., 2008. Numerical study on failure mechanism of tunnel in jointed rock mass. Tunnelling & Underground Space Technology, Incorporating Trenchless Technology Research, vol. 23: 500-507
Zhang Z., Chen F., Li N., Swoboda G., Liu N., 2017. Influence of fault on the surrounding rock stability of a tunnel: Location and thickness. Tunnelling and Underground Space Technology, incorporating Trenchless Technology Research, vol. 61:1-11
Xu D.P., Feng X.T., Cui Y.J., Jiang Q., 2015. Use of the equivalent continuum approach to model the behavior of a rock mass containing an interlayer shear weakness zone in an underground cavern excavation. Tunnelling and Underground Space Technology, vol. 47: 35-51
Kirsch E.G., 1898. Die Theorie der Elasitzität und die Bedürfnisse der Festigkeitslehre. Z VDI. Zeitschrift Des Vereines Deutscher Ingenieure, vol 42:797-807
Jiang Y., Tanabashi Y., Li B., Xiao J., 2006. Influence of geometrical distribution of rock joints on deformational behavior of underground opening. Tunnelling and Underground Space Technology, incorporating Trenchless Technology Research, vol. 21: 485-491
Itasca Consulting Group Inc., 2004. UDEC (Universal Distinct Element Code), Version 4.0, User Maunal. Itasca Consulting Group Minneapolis, MN, USA
Jiang Y., Nakagawa M., Esaki T., 2010. Quantitative evaluation of mechanical properties of the natural rock joints for analyzing behavior of structures in discontinuous rock masses. In: Proceedings of JSCE, vol. 624: 231-243
Jiang Y., Xiao J., Tanabashi Y., Mizokami T., 2004. Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition. International Journal of Rock Mechanics & Mining Sciences, vol. 41: 275-286
Kulatilake P.H.S.W., Ucpirti H., Wang S., Radberg G., Stephansson O., 1992. Use of the distinct element method to perform stress analysis in rock with non-persistent joints and to study the effect of joint geometry parameters on the strength and deformability of rock masses. Rock Mechanics & Rock Engineering, vol. 25: 253-274
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
