STUDY ON THE FORMATION MECHANISM OF BONDING LAYER AROUND PILE BODY IN SOFT CLAY
DOI:
https://doi.org/10.14311/CEJ.2019.03.0031Keywords:
Jacked pile, Soft clay, Bonding layer, Adhesion, Micro-structural analysisAbstract
After jacked pile is driven into the soft clay, a bonding layer would form a around pile body, it enlarges the pile side area and increases its bearing capacity effectively. At present, there are few reports about it. In this paper, the formation mechanism of a bonding layer was studied by theoretical analysis and field test. The results show that the soil particles adhering to a solid surface is an interface phenomenon, the adhesive force is related to soil moisture content, particle size and solid interface conditions. According to the theoretical analysis the bonding layer is the adhesion of tiny colloidal particles on pile surface and is the result of a disturbed soil becomes plastic body from plastic flow after water film disappears. Field test verified the theory and confirmed that the bonding layer was a pile-soil interaction, in the same clay, only the pile with coarse surface has the bonding layer. Finally, a microscopic test of soil samples was carried out, further explaining the formation mechanism of bonding layer.
Downloads
References
Skov R, Denver H.Time dependence of bearing capacity of piles[C].Proc Third International
Conference on the Application of Stress Wave Theory to Piles. Canada,1988:25-27.
Samson L, Authier J.Change in pile capacity with time: case histories[J].Canadian Geotechnical Journal,1986,23(2):174-180.
Gavin K G,O Kelly B C. Effect of friction fatigue on pile capacity in dense sand[J].Journal of Geotechnical and Geo-environmental Engineering,2007,133(1):63-71.
Zhang MinYi etc.Time Effect on the Ultimate Bearing Capacity of Static Pressed Pile[J].Chinese Journal of Rock Mechanics and Engineering, 2002(supp2): 2601~2604.(in Chinese)
Zhang Min-Yi.The Research and Application of Static pile[M].China Building Materials Industry Press,2004. (in Chinese)
Tang Shi-Dong ect.Analysis of the Consolidation Mode and Series Solution of soil around the pile in Saturated Soils[J].Investigation Science and Technology,2005,3(25):3-6.(in Chinese)
RenLuQuan,Chen De-Xing,Chen Bin-Cong.Soil adhesion studies Overview[J].Agricultural Engineering,1990,6(1):8-14.(in Chinese)
Qiu Shan-Feng,Heng Jing-Zhao.Soil adhesion studies[J].Japanese Soil and Fertilizer, 1972,43(8):271-277.
E.R.Fountaine. Investigation into the mechanism of soil adhesion[J].Journal of Soil Science,1954,5(2).
Qian Ding-Hua ect. Research Overview of soil-metal materials adhesion and friction [J].
Agricultural Machinery,1988,27(1):69-78. (in Chinese)
Zhang Ji-Xian. Research of soil-solid materials adhesion and friction [D].Jiangsu Institute of Technology,1985. (in Chinese)
Nea M S.Friction and adhesion between soil and rubber[J].J Agric Engng Res.1966,11(2):108-112.
JiaXian, Ren Lu-Quan, Chen Bin-Cong. Soil-solid materials adhesion theory [J].Agricultural Engineering,1995,11(4):350-354. (in Chinese)
Sun Yi-Yuan,Gao Xing-Fang,Yu Deng-Yuan.Agricultural soil mechanics[M].BeiJing: Agriculture Press,1985.(in Chinese)
M.L.NICHOLS AGRICULTURAL [M].ENGINEERING,1931.7.
Dong Jin, Ren Lu-Quan. Soil particle Fractal dimension and Size distribution and its effect on the adhesion behavior [J].Agricultural Engineering,1994(3):27-33. (in Chinese)
Ma Hai-Long.Experimental study on the bearing capacity timeliness of opening and closed pile[J].Rock Mechanics and Engineering, 2008,sup(2):3349-3353.(in Chinese)
Li Sheng-Lin.Some progress of soil binding Water in Soviet[J].Hydrogeology and Engineering Geology, 1982 (5):52-55. (in Chinese)
Li Jian-Wei. Experimental study and analysis of micro parameters of soft soil deformation and flow characteristics[D].Guang Zhou: South China University of Technology,2010. (in Chinese)
Yu Ren-Tian. Soil chemistry[M].Beijing: Science Press,1987.(in Chinese)
J Smcfarlane,D Tabor.Adhesion of solid sand the effect of surface films[J].Proc R Soc Lond A,1950(202):224-243.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).