Vol. 47 (2024): Modern Concrete and Composites 2023

Organised by Faculty of Civil Engineering, Czech Technical University in Prague
Guest Editors: Pavel Reiterman, Tomáš David, Vendula Davidová
ISBN 978-80-01-07309-4

Published: 2024-05-13

Foreword

Modern Concrete and Composites 2023

Editorial

Articles

Dowel bars – reinforcing elements of cement concrete pavements

Stanislav Bedřich, Jiří Grošek

1-7
- PDF
Cementitious material development for additive fabrication

David Čítek, Karel Hurtig, Vladislav Bureš, Peter Koteš

8-14
- PDF
Utilization of high fly ash dosage to reduce cement consumption in concrete formulations

Vendula Davidová, Tomáš David, Pavel Reiterman

15-18
- PDF
The application of UHPC on the monolithic part of the Štvanice footbridge

Vendula Davidová, Tomáš David, Pavel Reiterman, Vít Šmilauer

19-22
- PDF
The use of concrete slurry waste to improve the properties of the stabilised soil

Vendula Davidová, Tomáš David, Petr Mondschein, Pavel Reiterman

23-27
- PDF
Parameters of back filling material prepared from mine tailing, fly ash, and mine water

Karel Dvořák, Andrea Jančíková

28-34
- PDF
Possibilities of replacing natural sand in concrete

Kristina Fořtová, Tereza Pavlů, Diana Mariaková, Jakub Řepka, Tomáš Vlach

35-41
- PDF
Verification of material characteristic of natural fibers for concrete reinforcement

Jakub Hájek, Tomáš Vlach, Jakub Řepka, Vladimír Žďára

42-46
- PDF
Analysis of concrete taken from a loaded column by determining the modulus of elasticity

Kristýna Hrabová, Petr Cikrle, Sabina Olejková, Dalibor Kocáb

47-52
- PDF
Preparation of light fraction silicate filer after the mining for the base layers’ road construction

Andrea Jančíková, Karel Dvořák, Simona Ravaszová

53-57
- PDF
Processing and recycling of aggregate residues after ore extraction for stabilization of mined areas

Andrea Jančíková, Karel Dvořák, Simona Ravaszová

58-62
- PDF
Possibilities of reinforcement of subtle translucent concrete panel

Věra Kabíčková, Jakub Hájek, Tomáš Vlach, Jakub Řepka

63–65
- PDF
Production of concrete pavements using mixed cements

Jan Klobása, Rudolf Hela

66–70
- PDF
Monitoring degradation in alkaline-activated slag materials

Houssam Mahmoud, Libor Topolář, Iveta Plšková, Luboš Jakubka, Luboš Pazdera

71-74
- PDF
Concrete mixtures with photovoltaic panels glass: a review of the situation in Czech Republic

Diana Mariaková, Kristina Fořtová, Stanislav Černý, Tereza Pavlů

75–78
- PDF
Development of hydration temperatures on cement pastes

Milan Meruňka, Petr Šperling, Rudolf Hela

79–83
- PDF
Concrete and reliability of existing prestressed bridge structures

Aleš Mezera, Milan Holý, Miroslav Sýkora

84–88
- PDF
Self-compacting concrete with reduced formwork pressures

Jiří Němeček, Pavel Trávníček, Jan Tichý

89-96
- PDF
Structural health monitoring of construction

Jakub Niedoba

97–103
- PDF
Analysis of the effect of hydration heat resulting in the formation of cracks on the experimental block of the spillway at Orlik reservoir

Simona Potůčková, Milan Holý, Jiří Kolísko

104–107
- PDF
Mechanical properties of cement pastes containing plasma-treated silicon-based materials

Zdeněk Prošek, Pavel Tesárek, Aleš Palička, Oleg Babčenko

108–112
- PDF
Effect of preparation process on purity of tricalcium aluminate

Simona Ravaszová, Karel Dvořák, Andrea Jančíková

113–116
- PDF
The carbonation resistance of concrete on the basis of blended binders containing milled limestone

Pavel Reiterman, Vendula Davidová, Tomáš David

117–120
- PDF
Characteristics of fibres based on secondary raw materials and their use in concrete technology

Martin Sedlmajer, Jan Bubeník, Jiří Zach, Vítězslav Novák

121–127
- PDF
Measurement of asphalt concrete base thickness using ultrasonic pulse echo

Jaroslav Šnédar, Vojtěch Bartoň, Petr Cikrle

128–132
- PDF
Production of concrete pavements using mixed cements

Petr Šperling, Rudolf Hela

133–136
- PDF

Vol. 47 (2024): Modern Concrete and Composites 2023

Foreword

Modern Concrete and Composites 2023

Articles

Dowel bars – reinforcing elements of cement concrete pavements

Cementitious material development for additive fabrication

Utilization of high fly ash dosage to reduce cement consumption in concrete formulations

The application of UHPC on the monolithic part of the Štvanice footbridge

The use of concrete slurry waste to improve the properties of the stabilised soil

Parameters of back filling material prepared from mine tailing, fly ash, and mine water

Possibilities of replacing natural sand in concrete

Verification of material characteristic of natural fibers for concrete reinforcement

Analysis of concrete taken from a loaded column by determining the modulus of elasticity

Preparation of light fraction silicate filer after the mining for the base layers’ road construction

Processing and recycling of aggregate residues after ore extraction for stabilization of mined areas

Possibilities of reinforcement of subtle translucent concrete panel

Production of concrete pavements using mixed cements

Monitoring degradation in alkaline-activated slag materials

Concrete mixtures with photovoltaic panels glass: a review of the situation in Czech Republic

Development of hydration temperatures on cement pastes

Concrete and reliability of existing prestressed bridge structures

Self-compacting concrete with reduced formwork pressures

Structural health monitoring of construction

Analysis of the effect of hydration heat resulting in the formation of cracks on the experimental block of the spillway at Orlik reservoir

Mechanical properties of cement pastes containing plasma-treated silicon-based materials

Effect of preparation process on purity of tricalcium aluminate

The carbonation resistance of concrete on the basis of blended binders containing milled limestone

Characteristics of fibres based on secondary raw materials and their use in concrete technology

Measurement of asphalt concrete base thickness using ultrasonic pulse echo

Production of concrete pavements using mixed cements

ctujournals

Information

Developed By

Language